10K8 Thermistor Waterproof Probe
Availability: In Stock
Ex Tax: £20.83
This immersible sensor is ideal where liquid temperature measurement is needed without any complicated installation. This sensor is fully sealed between the sheath and cable to prevent any water ingress affecting the readings. The high-accuracy 10K8 thermistor bead is protected by a 316 stainless steel sheath to prevent any damage to the sensor. The cable used is ultra-flexible silicone rubber which is terminated in tails at the end to provide quick and easy installation. The whole sensor has a wide temperature range of -50°C to 120°C which covers almost all applications where liquid temperature is being measured.
The details and values of the thermistor used in this sensor can be found by clicking here.
Please Note: The tails end is not waterproof. Getting liquid around this area may damage the sensor and/or instrumentation the sensor is connected to.
This Sensor includes 3 wires, 2 red and 1 white. You only need to use 1 red and 1 white for 2-wire applications. You can cut off one of the red wires if not needed or join the two reds together.
|Sensor tip measuring range||-50 to 120°C|
|Accuracy class||Resistance Tolerance at 25°C = ±5%|
|Sheath material||316 Stainless Steel|
|Sheath outside diameter||5mm|
|Cable insulation material||Silicone Rubber|
|Cable length||3 metres|